Temperature Transmitters
A temperature transmitter converts the small signal from a temperature sensor ,Example thermocouple or RTD - to 4...20 mA signal for interfacing into other control equipment. Converters receive signals from a hazardous area instrument i.e., temperature sensors, potentiometers or load cells and then convert and condition them into signals such as 0/4…20mA or 0/2…10V.
Temperature Transmitters
OS-Ex-RTD-CC-1
The OS Ex RTD CC-1 is a BUREAU VERITAS approved interface unit, to accept an RTD input signal and offers a proportional galvanically isolated 4-20mA current signal.
OS Ex-RTD CC-1(LP)
The OS Ex-RTD CC-1(LP) is a loop powered interface unit, to accept an RTD input signal and offers a proportional galvanically isolated 0/4-20mA current signal.
OS Ex RTD CC-1(VC)
The OS Ex RTD CC-1(VC) is a BUREAU VERITAS approved interface unit, to accept an RTD input signal and offers a proportional galvanically isolated (0-10V DC) voltage signal.
OS-Ex-TC-CC
The OS-Ex TC-CC-1 is a BAREAU VERITAS (ATEX) approved interface unit, to accept an input mV signal and offers a proportional galvanically isolated 4-20mAcurrent signal.
OS-Ex-TC-CC-(LP)
The OS-Ex-TC-CC(LP) is a (BAREAU VERITAS) ATEX approved loop powered interface unit, to accept an input mV signal and offers a proportional galvanically isolated 4-20mA current signal.
OS-Ex-TC-CC -1(VC)
The OS-Ex TC-CC-1(VC) is a BAREAU VERITAS (ATEX) approved interface unit, to accept an input mV signal and offers a proportional galvanically isolated (0-10VDC) voltage signal.